Nov 22, 2026

Evaluating a Manufacturing Execution System

Evaluating a manufacturing execution system reveals where information gets stuck, which steps are unnecessary, and what should be developed for making informed decisions.

Evaluating a Manufacturing Execution System

Short Answer

Evaluating a manufacturing execution system identifies information bottlenecks, unnecessary steps, and areas for development to support informed decision-making.

The shift manager spends half the morning figuring out the status of each order. Production data is on a piece of paper, material movement is in the warehouse system, and the reason for scrap is in an Excel file. By the time management receives the weekly report, it discusses last week's issues. Evaluating a manufacturing execution system in such situations doesn't start with compiling a software list but with understanding how work actually progresses from order to finished product.

A manufacturing execution system - often referred to as MES - is useful when it makes the real operations of production visible and manageable. It's not good because it collects a lot of data or connects to every machine. It's good because the right person can make decisions based on reliable information at the right moment.

When is it justified to evaluate the system?

In many companies, the manufacturing system is not a single system. There is ERP, separate maintenance records, a terminal on the production line, a spreadsheet for capacity planning, a paper-based work order, and an experienced colleague who connects it all in their head. This can work for a while. However, with increasing order volumes, more shifts, a wider product range, or stricter quality expectations, manual reconciliation itself becomes a bottleneck.

The warning sign is not necessarily a spectacular system failure. Often, it's that the same data is recorded in two or three places. It's that the completion status has to be asked over the phone. Or it's that when investigating a discrepancy, it takes days to gather which raw material, machine, setting, and operator were involved.

In such cases, the existing system may not need replacement. It may be that work instructions are not standardized, master data is incomplete, or information transfer between ERP and production is uncertain. The task of evaluation is precisely to separate process errors, data problems, integration gaps, and actual system limitations.

Starting point for evaluating the manufacturing execution system

During evaluation, it's not worth asking first, "What MES should we buy?" It's more useful to follow a specific production order. When is it created? Who schedules it and based on what data? How does the work instruction reach the production line? Where is the actual time, material usage, quality control, and deviations recorded? When does the finished product actually become available for the warehouse and sales?

This walkthrough usually quickly reveals the steps the organization already takes for granted. For example, the operator manually writes down the quantity, the administrator later records it in the system, and then the production controller corrects the plan in a separate spreadsheet. All three people work conscientiously, yet the same information moves three times, increasing the chance of delay and error with each transfer.

A good evaluation does not only examine office processes. On the production floor, it's also important to understand why someone bypasses the system. Perhaps the terminal is slow, the screen does not follow the operation sequence, the barcode is unreadable, or data entry takes more time than the operation justifies. Workarounds developed by employees are often important signals, not disciplinary issues.

Four areas that need to be examined together

In a manufacturing environment, the value of the system is visible in four interrelated areas:

  • Process and responsibility: is it clear who initiates, modifies, checks, and closes a production order?
  • Data and traceability: can the material, batch, operation, quality result, and reason for deviation be traced back?
  • System connections: do the ERP, warehouse, quality assurance, machine data, and maintenance build on the same reality?
  • Operation and control: who supervises data quality, permissions, changes, and system availability?

If only screens and functions are examined, it's easy to draw the wrong conclusions. A system may provide detailed traceability, but if the master data of the production order is incorrect, the subsequent report only shows inaccurate data in an accurate format. Similarly, good integration does not fix a process where it's unclear who can approve a plan modification.

Real-time data does not always mean better operation

A common expectation with manufacturing systems is real-time visibility. This is often justified: with a bottleneck production line, short lead-time orders, or strict traceability requirements, even minutes can matter. In other cases, however, overly frequent data collection places disproportionate burdens on workers and infrastructure.

The question is not whether all data can be recorded, but which data improves decision-making. If a quality deviation can only be evaluated at the end of a shift, there's little point in building a second-by-second management dashboard for it. However, if a faulty setting can cause thousands of defective items, then the chain of detection, alert, and intervention is critical.

Therefore, the evaluation must also map out decision points. In what situation should production be stopped? Who can decide on the use of alternative materials? When is quality release necessary? How long can a deviation remain invisible to the responsible manager? Technology only provides real control if the organization also has clear answers to these questions.

Integration: where most hidden risks appear

Production execution rarely operates in isolation. Orders and item master data come from the ERP, the warehouse system manages inventory, quality assurance may use its own data, and machines represent separate data sources. If people are copying data between these, the operation is not only slower but also harder to control.

It's particularly problematic when systems show different completion statuses. Production says the order is complete, the warehouse says it hasn't been received, and sales have already made a delivery promise. In such cases, the question is not merely technical: it's necessary to define what "complete" means exactly, which system owns the given data, and what event triggers the status change.

The goal of integration is not for all data to appear in every system. Rather, it's for information to reach where it's needed from a clear source, at the right time, and in a verifiable way. This reduces parallel records, but equally important, it reduces dependence on individual employees.

What result can be considered a good evaluation?

At the end of a useful evaluation, there are no general statements like "production needs to be digitalized." Instead, the current process, specific points of failure, data owners, risks, and the order of improvements should be visible.

This order is essential. The greatest result may come from a unified work instruction, barcode material identification, or a reliable data connection between two systems. In another plant, it may be justified to implement a manufacturing execution system or significantly modify the existing MES. The right decision depends on the complexity of the plant's process, regulatory requirements, data quality, and future growth plans.

In CGAT's approach, evaluation is not about validating a pre-selected technology. The goal is for production to operate more predictably, for managers to receive more reliable insights, and for employees to spend less time on error-finding or repetitive administration.

It's worth starting with a single recurring problem: a defect detected too late, a plan reconciled daily, or information lost during a shift change. By following its path, not only a development task but also a real opportunity for improving production operations usually emerges.

Planning a similar system or integration?

Show us the current process and systems. We will help identify the lowest-risk next step.

Key Takeaways

  • Process and responsibility: Is it clear who initiates, modifies, checks, and closes a manufacturing order?
  • Data and traceability: Can materials, batches, operations, quality results, and reasons for deviations be traced?
  • System connections: Do ERP, warehouse, quality assurance, machine data, and maintenance rely on the same reality?
  • Operation and control: Who oversees data quality, permissions, changes, and system availability?

Frequently Asked Questions

When is it justified to evaluate the system?

In many companies, the manufacturing system is not a single system. There is ERP, separate maintenance records, a terminal on the production line, a spreadsheet for capacity planning, paper-based work orders, and an experienced colleague who mentally connects it all. This can work for a while, but with increasing orders, more shifts, a larger product range, or stricter quality expectations, manual coordination becomes a bottleneck.

What outcome is considered a good evaluation?

A useful evaluation does not end with general statements like "production needs to be digitalized." Instead, it should show the current process, specific points of failure, data owners, risks, and the order of developments.

Discuss the Specific Requirement

Request an initial proposal or book a 30-minute expert consultation.

Send us an inquiry
Free consultation Our services